{"id":9184,"date":"2026-07-10T17:45:02","date_gmt":"2026-07-10T09:45:02","guid":{"rendered":"https:\/\/www.ledtestsystem.com\/?p=9184"},"modified":"2026-07-10T17:45:02","modified_gmt":"2026-07-10T09:45:02","slug":"lisun-combination-wave-generator-technical-specifications-and-application-guide-for-surge-immunity-testing","status":"publish","type":"post","link":"https:\/\/ledtestsystem.com\/tr\/bloglar\/lisun-combination-wave-generator-technical-specifications-and-application-guide-for-surge-immunity-testing\/","title":{"rendered":"LISUN Combination Wave Generator Technical Specifications and Application Guide for Surge Immunity Testing"},"content":{"rendered":"

LISUN Combination Wave Generator Technical Specifications and Application Guide for Surge Immunity Testing<\/strong><\/p>\n

Soyut<\/strong>
\nThe increasing complexity of modern electronic systems, coupled with their pervasive integration into critical infrastructure, necessitates rigorous immunity testing against transient overvoltages. The LISUN SG61000-5 Dalgalanma Jenerat\u00f6r\u00fc<\/a>, designed in accordance with IEC 61000-4-5 and related standards, provides a calibrated source of combination waves (1.2\/50 \u00b5s open-circuit voltage and 8\/20 \u00b5s short-circuit current) for evaluating the surge withstand capability of equipment across diverse industries. This article delineates the technical specifications, operational principles, application protocols, and competitive attributes of the LISUN SG61000-5, substantiated by empirical data and relevant regulatory frameworks.<\/p>\n

1. Introduction to Combination Wave Surge Phenomena and Testing Rationale<\/strong><\/p>\n

Transient surges\u2014originating from lightning strikes, power grid switching operations, or load dump events\u2014inject high-energy pulses into electrical networks. These events can induce dielectric breakdown, latch-up, or latent damage in semiconductor junctions. The combination wave, defined by its dual output characteristics (voltage waveform 1.2\/50 \u00b5s and current waveform 8\/20 \u00b5s), replicates the most severe coupling mechanisms encountered in AC\/DC power lines and signal interconnections.<\/p>\n

The LISUN SG61000-5 Surge Generator addresses the need for repeatable, standardized test conditions. By delivering precisely shaped impulses with controlled energy content (up to 6 kV peak voltage and 3 kA peak current), it enables engineers to quantify the immunity of equipment such as lighting control units, industrial programmable logic controllers (PLCs), household appliance power supplies, and medical diagnostic instruments. The synergy between open-circuit voltage (determining insulation stress) and short-circuit current (evaluating surge protection device clamping behavior) makes the combination wave indispensable for comprehensive immunity qualification.<\/p>\n

2. Core Technical Specifications of the LISUN SG61000-5 Surge Generator<\/strong><\/p>\n

The LISUN SG61000-5 is engineered with modular architecture to accommodate both single-phase and three-phase applications up to 690 V AC\/DC. Table 1 summarizes its primary electrical characteristics:<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
Parametre<\/th>\n\u015eartname<\/th>\nA\u00e7\u0131klamalar<\/th>\n<\/tr>\n<\/thead>\n
Open-Circuit Voltage (Uoc)<\/td>\n0.2 kV to 6 kV \u00b110%<\/td>\n1.2\/50 \u00b5s waveform, programmable step 0.1 kV<\/td>\n<\/tr>\n
Short-Circuit Current (Isc)<\/td>\n0.1 kA to 3 kA \u00b110%<\/td>\n8\/20 \u00b5s waveform, derived from coupled network<\/td>\n<\/tr>\n
Polarite<\/td>\nPositive \/ Negative \/ Alternating<\/td>\nUser-selectable via touch-screen interface<\/td>\n<\/tr>\n
Phase Angle Synchronization<\/td>\n0\u00b0 to 360\u00b0, step 1\u00b0<\/td>\nFor AC mains coupling<\/td>\n<\/tr>\n
Pulse Repetition Rate<\/td>\n0.5 to 60 seconds, adjustable<\/td>\nControlled cooling interval to maintain component stability<\/td>\n<\/tr>\n
Coupling Network<\/td>\nBuilt-in for single\/three-phase, 0\u2013690 V<\/td>\nAutomatic coupling\/decoupling per IEC 61000-4-5<\/td>\n<\/tr>\n
Impedance<\/td>\n2 \u03a9 nominal<\/td>\nCombination wave generator requirement per standard<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The instrument integrates a solid-state switching matrix and a high-voltage capacitor bank that charges through a controlled DC\/DC converter. Its digital control loop ensures wavefront precision within 2% of nominal parameters across all voltage levels.<\/p>\n

3. Fundamental Electromagnetic Principles Governing the 1.2\/50 \u00b5s and 8\/20 \u00b5s Waveforms<\/strong><\/p>\n

The combination wave generator operates on the principle of RLC transient discharge. A pre-charged capacitor is discharged through a pulse-shaping network comprising inductors, resistors, and a coupling capacitor. The resultant output depends on the load impedance:<\/p>\n

    \n
  • Open-circuit condition:<\/strong> The wavefront rise time (1.2 \u00b5s \u00b130%) and duration to half-value (50 \u00b5s \u00b120%) are determined by the network\u2019s natural frequency and damping factor. For the SG61000-5, the virtual front time is calibrated using a resistive voltage divider with bandwidth exceeding 100 MHz.<\/li>\n
  • Short-circuit condition:<\/strong> The current waveform exhibits a faster rise (8 \u00b5s \u00b120%) and decay (20 \u00b5s \u00b120%), governed by the inductive path through the generator\u2019s current-limiting resistor. The generator automatically switches between voltage and current source modes based on the impedance presented by the equipment under test (EUT).<\/li>\n<\/ul>\n

    For accurate test results, the measurement system employs a differential probe (1:1000 attenuation) for voltage and a Rogowski coil (bandwidth 20 MHz) for current. The instrument\u2019s internal microcontroller compensates for parasitic capacitance in the coupling network, ensuring waveform fidelity even when testing high-capacitance loads such as power factor correction capacitors in lighting ballasts or input filters in medical power supplies.<\/p>\n

    4. Coupling and Decoupling Network Topology for Diverse Power Topologies<\/strong><\/p>\n

    The LISUN SG61000-5 incorporates a universal coupling\/decoupling network (CDN) that simplifies connection to various EUT configurations without external accessories. The coupling mode selection is critical for realistic surge injection:<\/p>\n

      \n
    • Line-to-Line (Differential Mode):<\/strong> Achieved by connecting the generator output to one phase conductor and the decoupling network reference to the neutral. This simulates surges generated by switching transients within the power distribution panel, relevant for household appliances (e.g., induction cooktops) and low-voltage electrical appliances.<\/li>\n
    • Line-to-Ground (Common Mode):<\/strong> The generator is referenced to the protective earth through capacitive coupling. This mode is essential for testing medical devices and spacecraft subsystems, where ground potential rise can disrupt sensitive analog front ends.<\/li>\n
    • Three-Phase Configurations:<\/strong> For industrial equipment and power tools, the SG61000-5 automatically selects the phase angle of surge injection (0\u00b0, 90\u00b0, 180\u00b0, 270\u00b0) relative to the mains waveform. This capability is pivotal for evaluating whether a surge occurring at voltage zero-crossing (low energy) or peak (high stress) triggers failure in triac drivers or motor controllers.<\/li>\n<\/ul>\n

      The decoupling network ensures that the surge is not back-fed into the mains supply, protecting both the line impedance stabilization network (LISN) and the laboratory infrastructure. Its inductance and capacitance values are selected per Table 1 of IEC 61000-4-5, maintaining a 2 \u03a9 impedance path for the transient while attenuating the surge below 15% of its original value at the input port.<\/p>\n

      5. Industry-Specific Application Protocols and Test Level Selection<\/strong><\/p>\n

      The selection of test voltage levels depends on the installation environment category defined by the standard. Table 2 provides typical values for representative industries:<\/p>\n\n\n\n\n\n\n\n\n\n\n
      Industry<\/th>\nInstallation Class<\/th>\nRecommended Uoc (kV)<\/th>\nDominant Coupling Mode<\/th>\nCommon EUT Examples<\/th>\n<\/tr>\n<\/thead>\n
      Ayd\u0131nlatma Armat\u00fcrleri<\/td>\nClass II (Indoor)<\/td>\n1.0 \u2013 2.5<\/td>\nLine-to-Line<\/td>\nLED drivers, street lighting controllers<\/td>\n<\/tr>\n
      T\u0131bbi Cihazlar<\/td>\nClass I (Fixed)<\/td>\n2.0 \u2013 4.0<\/td>\nLine-to-Ground<\/td>\nPatient monitors, infusion pumps, MRI subsystems<\/td>\n<\/tr>\n
      Rail Transit<\/td>\nClass IV (Outdoor)<\/td>\n4.0 \u2013 6.0<\/td>\nLine-to-Ground + Line-to-Line<\/td>\nTrain control units, signaling relays<\/td>\n<\/tr>\n
      Automobile Industry<\/td>\nClass II (12V\/24V)<\/td>\n0.5 \u2013 1.5 (via ISO 7637)<\/td>\nLine-to-Ground<\/td>\nECU, ABS modules, infotainment systems<\/td>\n<\/tr>\n
      Audio-Video Equipment<\/td>\nClass I (Indoor)<\/td>\n1.0 \u2013 2.0<\/td>\nLine-to-Line<\/td>\nAudio amplifiers, projectors, broadcast receivers<\/td>\n<\/tr>\n
      Power Tools<\/td>\nClass II (Portable)<\/td>\n2.0 \u2013 4.0<\/td>\nLine-to-Ground<\/td>\nElectric drills, grinders, saws<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

      \u0130\u00e7in Intelligent Equipment<\/em> (e.g., smart home gateways) and Information Technology Equipment<\/em> (servers, routers), the SG61000-5 must also inject surges into signal ports. The instrument provides a dedicated coaxial output with 50 \u03a9 impedance for differential signaling lines. The user configures the pulse amplitude manually based on the cable length classification\u2014for example, a 10-meter Ethernet cable in a commercial building requires test level 2 (1.0 kV) per IEC 61000-4-5 Annex B.<\/p>\n

      6. Validation Protocols for Lighting Fixtures and Power Equipment<\/strong><\/p>\n

      Lighting fixtures, particularly those utilizing LED technology with switching-mode power supplies (SMPS), exhibit vulnerability to surge-induced failure in the electrolytic capacitors and rectifier diodes. The test sequence using the SG61000-5 involves:<\/p>\n

        \n
      1. Pre-conditioning:<\/strong> Apply rated AC voltage (e.g., 230 V, 50 Hz) to the EUT for 10 minutes until thermal equilibrium.<\/li>\n
      2. Surge injection:<\/strong> Deliver five positive and five negative impulses at 60-second intervals, synchronized at 0\u00b0, 90\u00b0, and 270\u00b0 phase angles.<\/li>\n
      3. Failure detection criteria:<\/strong> A change in luminous flux exceeding 10% within 100 ms indicates insufficient immunity. The SG61000-5\u2019s integrated peak detection allows immediate identification of voltage sag or dropout.<\/li>\n<\/ol>\n

        \u0130\u00e7in Power Equipment<\/em> (uninterruptible power supplies, inverters), the generator must also test the DC-side ports. The SG61000-5\u2019s built-in DC coupling mode switches the internal network to a high-voltage capacitor (10 \u00b5F) and series resistance (10 \u03a9) to replicate the impedance of a battery bank. This configuration has proven effective in certifying photovoltaic inverters against lightning-induced surges\u2014a requirement increasingly mandated by IEC 62109.<\/p>\n

        7. Competitive Advantages of the LISUN SG61000-5 in Multi-Domain Testing<\/strong><\/p>\n

        Compared to alternative surge generators, the LISUN SG61000-5 offers distinct engineering benefits that enhance both test accuracy and operational efficiency:<\/p>\n

          \n
        • Automatic Impedance Matching:<\/strong> The instrument detects the EUT\u2019s input impedance (capacitive or inductive) and adjusts the internal pulse-shaping network to maintain waveform parameters within standard tolerances. This feature is critical when testing Electronic Components<\/em> like varistors or gas discharge tubes, whose impedance drops transiently during conduction.<\/li>\n
        • Phase Angle Repeatability:<\/strong> The SG61000-5 employs a phase-locked loop (PLL) that locks to the mains frequency (45\u201365 Hz) with \u00b10.2\u00b0 accuracy. This ensures that surges occurring at the same electrical angle produce identical stress across consecutive tests\u2014a requirement for quality control in Instrumentation<\/em> calibration.<\/li>\n
        • Multi-Standard Firmware:<\/strong> Beyond IEC 61000-4-5, the generator includes preset routines for ANSI C62.41 (Category A and B) and GB\/T 17626.5 (Chinese national standard), enabling seamless compliance testing for Low-voltage Electrical Appliances<\/em> exported to multiple jurisdictions.<\/li>\n
        • Thermal Management:<\/strong> The integrated forced-air cooling system, combined with a temperature sensor on the discharge capacitor, automatically extends the interval between pulses when the internal temperature exceeds 45\u00b0C. This prevents waveform degradation due to component heating during prolonged test sequences\u2014a common issue in lower-tier generators.<\/li>\n<\/ul>\n

          8. Integration of the SG61000-5 into Automated Test Environments<\/strong><\/p>\n

          Modern laboratories often require remote operation and data logging for high-volume testing. The LISUN SG61000-5 supports both RS-232 and USB interfaces, with a command set that allows a host PC to control all parameters:<\/p>\n

            \n
          • Test script execution:<\/strong> The user can pre-program a sequence of surge amplitudes, polarities, and phase angles using a simple text-based script. For example, testing Communication Transmission<\/em> equipment (e.g., fiber optic modems) may require 50 pulses at 0.5 kV with alternating polarity\u2014a task executed automatically within 15 minutes.<\/li>\n
          • Real-time waveform capture:<\/strong> The generator outputs analog signals (voltage and current proportional to 10:1) to an external oscilloscope. The built-in 7-inch touchscreen displays the captured waveform and overlays the standard tolerance bands (e.g., \u00b120% for rise time). Operators can immediately reject any pulse that falls outside specification, ensuring test validity.<\/li>\n
          • Data export:<\/strong> Test results, including peak voltage, peak current, rise time, and pulse count, are saved in CSV format for inclusion in compliance reports.<\/li>\n<\/ul>\n

            This integration capability is particularly valuable for Automobile Industry<\/em> Ve Rail Transit<\/em> sectors, where battery of tests across multiple voltage levels (0.5 kV to 6 kV) must be completed within a single shift.<\/p>\n

            9. Mitigating Common Failure Modes: Application Notes for Testing Medical Devices<\/strong><\/p>\n

            Medical devices impose stringent immunity requirements due to their direct interaction with patients. The SG61000-5\u2019s performance in this domain is exemplified by testing a ventilator power supply:<\/p>\n

              \n
            • Challenge:<\/strong> The EUT\u2019s input filter includes Y-capacitors (4.7 nF each) connected to ground. During common-mode surge injection at 2 kV, the high dV\/dt ( > 10 kV\/\u00b5s) can exceed the capacitor\u2019s voltage rating, leading to dielectric puncture.<\/li>\n
            • Resolution:<\/strong> Using the SG61000-5\u2019s pre-charge function, the user first injects a 500 V surge to assess leakage current. If the current remains below 10 mA (measured via the built-in shunt), the instrument proceeds to the full test level. This stepwise approach prevents catastrophic failure that could compromise the device under test.<\/li>\n<\/ul>\n

              Furthermore, the generator\u2019s low residual energy ( < 0.25 J per pulse at 2 kV) ensures that even if the protection circuit fails, the resulting arc does not ignite surrounding components\u2014a critical safety consideration for T\u0131bbi Cihazlar<\/em> operating in oxygen-rich environments.<\/p>\n

              10. FAQs: Operational and Technical Clarifications<\/strong><\/p>\n

              Q1: Can the LISUN SG61000-5 test equipment rated above 690 V, such as 1 kV photovoltaic inverters?<\/strong>
              \nThe standard configuration supports up to 690 V AC\/DC. For higher voltages, an external coupling transformer rated for 1 kV and 100 A is required. The SG61000-5\u2019s output stage is galvanically isolated, allowing such adaptation without modifying the generator.<\/p>\n

              Q2: What is the proper maintenance interval for the surge capacitor bank?<\/strong>
              \nThe manufacturer recommends replacing the main storage capacitor every 100,000 pulses or after 3 years of continuous operation, whichever occurs first. Dielectric leakage should be monitored annually using the instrument\u2019s self-test function, which measures capacitor voltage decay over 60 seconds.<\/p>\n

              Q3: How does the SG61000-5 ensure waveform synchronization for three-phase EUTs?<\/strong>
              \nThe generator analyzes the phase sequence (L1, L2, L3) of the applied mains using zero-crossing detectors on each phase. The internal microcontroller then generates the firing pulse for the thyristor switch at the user-specified phase angle relative to the target line. Verification can be performed using a four-channel oscilloscope connected to the generator\u2019s trigger output.<\/p>\n

              Q4: Is it possible to test signal lines without an external coupling network?<\/strong>
              \nYes. The SG61000-5 includes a separate coaxial output (Type N connector) that provides the combination wave with peak voltage adjustable down to 50 V. For balanced lines (e.g., RS-485), the user must add an external 100 \u03a9 resistor between the generator output and each conductor to simulate the characteristic impedance. The generator\u2019s internal coupling capacitor (0.1 \u00b5F) blocks DC components.<\/p>\n

              Q5: What is the influence of ambient temperature on the generator\u2019s calibration?<\/strong>
              \nThe waveform parameters\u2014particularly the rise time\u2014are sensitive to temperature changes affecting the inductance of the pulse-shaping coil. The SG61000-5 includes a temperature-compensated oscillator that adjusts the charging current to maintain consistent wavefront characteristics between 10\u00b0C and 40\u00b0C. For high-precision testing at extremes (e.g., -10\u00b0C in Spacecraft<\/em> ground support equipment), an external environmental chamber is recommended.<\/p>\n

              \u00c7\u00f6z\u00fcm<\/strong><\/p>\n

              The LISUN SG61000-5 Combination Wave Generator provides a robust, standards-compliant platform for surge immunity testing across a broad spectrum of industries. Its combination of precise waveform control, intuitive automation, and comprehensive protection features ensures reproducible results for both research laboratories and production quality assurance departments. As transient threats to electronic systems continue to evolve, the SG61000-5 remains an indispensable instrument for verifying the resilience of critical infrastructure, consumer electronics, and medical devices.<\/p>","protected":false},"excerpt":{"rendered":"

              LISUN Combination Wave Generator Technical Specifications and Application Guide for Surge Immunity Testing Abstract The increasing complexity of modern electronic systems, coupled with their pervasive integration into critical infrastructure, necessitates rigorous immunity testing against transient overvoltages. The LISUN SG61000-5 Surge Generator, designed in accordance with IEC 61000-4-5 and related standards, provides a calibrated source of […]<\/p>\n","protected":false},"author":1,"featured_media":4867,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[1266],"class_list":["post-9184","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs","tag-combination-wave-generator"],"_links":{"self":[{"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/posts\/9184","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/comments?post=9184"}],"version-history":[{"count":1,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/posts\/9184\/revisions"}],"predecessor-version":[{"id":9185,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/posts\/9184\/revisions\/9185"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/media\/4867"}],"wp:attachment":[{"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/media?parent=9184"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/categories?post=9184"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ledtestsystem.com\/tr\/wp-json\/wp\/v2\/tags?post=9184"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}