{"id":8881,"date":"2026-06-01T09:59:00","date_gmt":"2026-06-01T01:59:00","guid":{"rendered":"https:\/\/www.ledtestsystem.com\/?p=8879"},"modified":"2026-06-01T09:59:00","modified_gmt":"2026-06-01T01:59:00","slug":"lisun-generator-features-and-benefits","status":"publish","type":"post","link":"https:\/\/ledtestsystem.com\/ja\/%e3%83%96%e3%83%ad%e3%82%b0\/lisun-generator-features-and-benefits\/","title":{"rendered":"LISUN Generator Features and Benefits"},"content":{"rendered":"

Whitepaper: Technical Analysis of the \u30ea\u30b9\u30f3<\/a> ESD61000-2 Series Electrostatic Discharge Generator and Associated Benefits for Compliance Testing<\/strong><\/p>\n

\u62bd\u8c61\u7684\u306a<\/strong>
\nElectrostatic discharge (ESD) represents a significant threat to the reliability and operational integrity of modern electronic systems. The LISUN ESD61000-2 series, particularly the ESD61000-2C model, is a precision instrument designed to simulate ESD events in accordance with international standards. This document provides a comprehensive technical examination of the generator\u2019s features, its application across diverse industrial sectors\u2014including lighting fixtures, medical devices, and rail transit\u2014and the quantifiable benefits derived from its use in product development and compliance verification.<\/p>\n

1. Introduction: The Role of Precision ESD Simulation in Product Reliability<\/strong><\/p>\n

The miniaturization of semiconductor geometries and the proliferation of high-speed digital interfaces have rendered contemporary electronic assemblies increasingly susceptible to damage from electrostatic discharge. A single ESD event, often imperceptible to humans, can induce latent defects, latch-up, or catastrophic failure in sensitive components. For manufacturers in sectors such as automobile electronics, spacecraft instrumentation, and intelligent equipment, mitigating this risk is paramount. The LISUN ESD61000-2C electrostatic discharge generator (ESD Gun<\/a>) functions as a critical tool for pre-compliance and formal qualification testing. Its design directly addresses the need for repeatable, calibrated stress waveforms as defined by IEC 61000-4-2 and ISO 10605.<\/p>\n

2. Core Design Architecture of the LISUN ESD61000-2C Generator<\/strong><\/p>\n

The LISUN ESD61000-2C is not a monolithic device but a system comprising several interdependent modules that ensure waveform fidelity and operator safety.<\/p>\n

2.1. High-Voltage Generation and Storage Network<\/strong>
\nThe device utilizes a high-frequency switching power supply to charge a storage capacitor network. The nominal capacitance of the network (150 pF \u00b1 10%) is selected to meet the stringent requirements of the IEC 61000-4-2 standard for human-body model (HBM) discharges. The charging circuit is regulated to provide voltage output from 0.2 kV to 30 kV with a resolution of 0.1 kV. A critical feature is the feedback loop that maintains voltage stability within \u00b15% of the set value, even under variable mains supply conditions. This is essential for replicating test severity levels (Level 1 through Level 4) accurately.<\/p>\n

2.2. Discharge Head Architecture and Waveform Shaping<\/strong>
\nThe discharge head integrates the discharge resistor (330 \u03a9 \u00b1 10%) and the return current path components. The head is designed to minimize parasitic inductance, which is the primary cause of waveform overshoot and ringing in inferior generators. The resulting current waveform\u2014characterized by a rise time of 0.7 to 1.0 nanoseconds and a peak current of up to 30A at 8kV (in contact mode)\u2014conforms to the standard 5\/30 ns pulse shape. The ESD61000-2C offers interchangeable heads for air discharge and contact discharge modes, with a dedicated ESD-CDM (Charged Device Model)<\/strong> attachment available for simulating discharges from automated handling equipment.<\/p>\n

2.3. Control and User Interface<\/strong>
\nThe generator features an embedded microcontroller for managing test sequences. The user interface includes a backlit LCD display and a rotary encoder for parameter selection. Parameters configurable via the interface include: voltage level, discharge polarity (positive or negative), pulse count (1 to 9999), pulse interval (0.1 to 9.9 seconds), and trigger mode (single, continuous, or count). The unit also supports remote control via RS-232 or USB interfaces, enabling integration into automated test setups.<\/p>\n

3. Technical Specifications and Performance Metrics<\/strong><\/p>\n

To facilitate a technical comparison, the following table summarizes the salient specifications of the LISUN ESD61000-2C.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u30d1\u30e9\u30e1\u30fc\u30bf<\/th>\n\u4ed5\u69d8<\/th>\nStandard Reference<\/th>\n<\/tr>\n<\/thead>\n
\u51fa\u529b\u96fb\u5727\u7bc4\u56f2<\/strong><\/td>\n0.2 kV to 30 kV (adjustable)<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
\u51fa\u529b\u96fb\u5727\u7cbe\u5ea6<\/strong><\/td>\n\u00b1 5%<\/td>\n\u8a72\u5f53\u306a\u3057<\/td>\n<\/tr>\n
\u6975\u6027<\/strong><\/td>\nPositive \/ Negative (switchable)<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
Energy Storage Capacitance<\/strong><\/td>\n150 pF \u00b1 10%<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
Discharge Resistance<\/strong><\/td>\n330 \u03a9 \u00b1 10%<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
Rise Time (tr)<\/strong><\/td>\n0.7 ns to 1.0 ns<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
Pulse Repetition Rate<\/strong><\/td>\n0.1 s \u2013 99 s<\/td>\nUser-configurable<\/td>\n<\/tr>\n
Discharge Modes<\/strong><\/td>\nContact \/ Air Discharge<\/td>\nIEC 61000-4-2<\/td>\n<\/tr>\n
Optional Accessories<\/strong><\/td>\nESD-CDM Adapter<\/td>\nJEDEC, AEC-Q100<\/td>\n<\/tr>\n
Operating Temperature<\/strong><\/td>\n0\u00b0C to 40\u00b0C<\/td>\n\u8a72\u5f53\u306a\u3057<\/td>\n<\/tr>\n
Dimensions (Main Unit)<\/strong><\/td>\n350 x 200 x 250 mm<\/td>\n\u8a72\u5f53\u306a\u3057<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

4. Testing Principles and Methodologies<\/strong><\/p>\n

The operational principle of the LISUN ESD61000-2C is predicated on the rapid transfer of stored electrical energy into a device under test (DUT). The testing procedure is defined by a rigorous standard framework.<\/p>\n

4.1. Contact vs. Air Discharge Modes<\/strong><\/p>\n

    \n
  • Contact Discharge:<\/strong> The discharge electrode is held in direct contact with the conductive surface of the DUT prior to the initiation of the pulse. This method is preferred for its repeatability, as it eliminates the variability of the air gap breakdown. All specifications for the ESD61000-2C, particularly rise time, are validated in contact mode. This is the standard method for testing enclosures of Household Appliances<\/strong>, Power Tools<\/strong>, and Industrial Equipment<\/strong>.<\/li>\n
  • Air Discharge:<\/strong> The electrode is moved toward the DUT until a spark occurs across the air gap. This mode is used when contact cannot be made (e.g., non-conductive surfaces, seams, and vents). The ESD61000-2C allows for a controlled approach speed, which is critical for simulating the human-metal discharge in environments like Audio-Video Equipment<\/strong> enclosures.<\/li>\n<\/ul>\n

    4.2. Severity Levels and Application<\/strong>
    \nThe IEC 61000-4-2 defines four severity levels for contact discharge:<\/p>\n

      \n
    • Level 1:<\/strong> 2 kV (for controlled environments like server rooms for Information Technology Equipment<\/strong>)<\/li>\n
    • Level 2:<\/strong> 4 kV (typical for household environments affecting Low-voltage Electrical Appliances<\/strong>)<\/li>\n
    • Level 3:<\/strong> 6 kV (general industrial environment for Lighting Fixtures<\/strong> \u305d\u3057\u3066 Communication Transmission<\/strong> equipment)<\/li>\n
    • Level 4:<\/strong> 8 kV (harsh industrial or user-contact environments for Medical Devices<\/strong> \u305d\u3057\u3066 Automobile Industry<\/strong> components)<\/li>\n<\/ul>\n

      4.3. The Charged Device Model (ESD-CDM) Testing<\/strong>
      \nUsing the optional ESD-CDM<\/strong> accessory, the LISUN ESD61000-2C can simulate a different physical phenomenon: where the device itself (e.g., an Electronic Component<\/strong> or small Instrumentation<\/strong> module) becomes charged and is then discharged to ground. This is particularly relevant for high-speed data ports in Spacecraft<\/strong> \u305d\u3057\u3066 Rail Transit<\/strong> signaling systems, where a field-induced discharge can damage input\/output pins.<\/p>\n

      5. Industry-Specific Applications and Use Cases<\/strong><\/p>\n

      The versatility of the LISUN ESD61000-2C makes it indispensable across a spectrum of manufacturing and quality assurance environments.<\/p>\n

      5.1. Medical Devices and Low-Voltage Electrical Appliances<\/strong>
      \nIn Medical Devices<\/strong>, patient safety and device reliability are critical. An ESD event near a sensor input in a patient monitoring system can cause a false alarm or, worse, a data corruption event. The ESD61000-2C is used to stress test the insulation barriers and shield effectiveness of electro-medical apparatus. For Low-voltage Electrical Appliances<\/strong>, such as programmable controllers, testing to Level 3 (6 kV) ensures the appliance will not experience logic faults or reset conditions during typical consumer handling.<\/p>\n

      5.2. Automobile Industry and Power Equipment<\/strong>
      \n\u305d\u306e Automobile Industry<\/strong> presents a unique challenge due to the presence of high-voltage traction systems and sensitive infotainment electronics. The ESD61000-2C is employed per ISO 10605 to test components like touchscreen interfaces, control units, and sensor modules. Testing at up to 25 kV (air discharge) simulates the electrostatic charge generated by occupants on seats. Similarly, Power Equipment<\/strong>, including inverters and battery management systems, requires robust ESD protection to prevent latch-up in MOSFET gate drivers.<\/p>\n

      5.3. Intelligent Equipment and Communication Transmission<\/strong>
      \nIntelligent Equipment<\/strong>, such as smart meters and IoT gateways, must maintain wireless connectivity under all conditions. An ESD strike to the antenna port can be catastrophic. Coupling of the ESD pulse from the generator to the RF front-end is a standard test. For Communication Transmission<\/strong> equipment (e.g., base station receivers), the ESD61000-2C is used to test the robustness of the Ethernet and coaxial cable interfaces, ensuring that the common-mode transient immunity (CMTI) of the transceiver ICs is not exceeded.<\/p>\n

      5.4. Lighting Fixtures and Audio-Video Equipment<\/strong>
      \nModern Lighting Fixtures<\/strong>, particularly those using LED drivers with minimal board space, are vulnerable to ESD. The generator is used to apply contact discharge to the heat sink and wiring terminals. For Audio-Video Equipment<\/strong> with exposed metal chassis and input jacks, air discharge testing at 15 kV is performed to simulate the user touching the device after walking across a carpet.<\/p>\n

      6. Competitive Advantages of the LISUN ESD61000-2C Platform<\/strong><\/p>\n

      When benchmarked against other ESD simulators in the market, the LISUN ESD61000-2C offers several distinct advantages from a technical and operational perspective.<\/p>\n

      6.1. Waveform Integrity at High Voltages<\/strong>
      \nA common failure mode in low-cost ESD generators is waveform distortion at voltages above 15 kV. The proprietary discharge network in the ESD61000-2C maintains a rise time below 1.0 ns even at 30 kV. This is critical for testing Spacecraft<\/strong> components that must withstand ESD events in low-humidity environments. Competitive units often exhibit a rise time degradation exceeding 1.5 ns, which understresses the DUT and provides a false sense of immunity.<\/p>\n

      6.2. Modularity and Field-Upgradeable Design<\/strong>
      \nThe ability to add a ESD-CDM<\/strong> probe without purchasing a separate instrument significantly reduces capital expenditure. This modularity allows a laboratory testing Electronic Components<\/strong> for the semiconductor industry to switch between HBM and CDM stress modes in under five minutes, a time-to-test advantage not offered by integrated but non-separable competitor systems.<\/p>\n

      6.3. Software Calibration and Data Logging<\/strong>
      \nUnlike analog-based generators that require manual calibration with a potentiometer, the ESD61000-2C utilizes a digital calibration file stored on the main unit. This file, matched to the serial number of the discharge head, ensures that the exact waveform is maintained as the head ages. Furthermore, the built-in data logging capability allows test engineers to archive the test parameters\u2014voltage, polarity, number of pulses, and pass\/fail criteria\u2014directly to a USB drive. This is essential for traceability in Instrumentation<\/strong> \u305d\u3057\u3066 Information Technology Equipment<\/strong> certifications.<\/p>\n

      7. Calibration and Compliance Standards Alignment<\/strong><\/p>\n

      To ensure the generated waveform is legally defensible in a compliance audit, the LISUN ESD61000-2C must be calibrated against a target waveform verified with an oscilloscope and current target (e.g., the Pellegrini target). The generator supports an internal self-test mode that verifies the discharge resistor and capacitance values. The alignment with the IEC 61000-4-2 standard is verified using a verification target that converts the current pulse into a voltage pulse for oscilloscope observation. The measured parameters (Ipeak, tr, t2) must fall within the specified tolerance corridor. For Power Equipment<\/strong> \u305d\u3057\u3066 Industrial Equipment<\/strong> destined for the European market, this alignment is a prerequisite for CE marking under the EMC Directive 2014\/30\/EU.<\/p>\n

      8. Practical Integration into the Product Development Lifecycle<\/strong><\/p>\n

      Testing with the LISUN ESD61000-2C is not a post-production gate but a continuous process.<\/p>\n

        \n
      • Prototype Stage:<\/strong> Early PCBAs from Low-voltage Electrical Appliances<\/strong> or Intelligent Equipment<\/strong> are subjected to basic 2 kV contact discharge at critical nodes (reset lines, GPIOs). This identifies layout weaknesses\u2014such as insufficient ground stitching or lack of TVS diodes\u2014before the product is encased.<\/li>\n
      • Pre-Compliance Stage:<\/strong> The full severity levels (4 kV to 15 kV) are applied to the housing, seams, and I\/O ports. This stage for devices like Household Appliances<\/strong> often reveals issues with the mechanical design, such as gaps that allow an air discharge to couple to an internal trace.<\/li>\n
      • Qualification Stage:<\/strong> Formal testing with recorded data is performed. For Medical Devices<\/strong> \u305d\u3057\u3066 Rail Transit<\/strong> systems, this data forms part of the Technical Construction File (TCF) submitted to the Notified Body.<\/li>\n<\/ul>\n

        9. Frequently Asked Questions (FAQ)<\/strong><\/p>\n

        Q1: What is the primary difference between the LISUN ESD61000-2 and the ESD61000-2C?<\/strong>
        \nThe ESD61000-2C offers an extended voltage output range (up to 30 kV vs. typically 20 kV for the base ESD61000-2) and includes a more advanced control system with a larger LCD display and faster pulse repetition rate. The “C” variant also includes standard features for remote control via RS-232, which is often an option on the base model.<\/p>\n

        Q2: How do I select the correct severity level for testing an automotive interior component?<\/strong>
        \nFor Automobile Industry<\/strong> components, the reference standard is ISO 10605. For user-accessible parts (e.g., dashboard switches), a contact test of 8 kV and an air discharge test of 15 kV are typical. For in-vehicle infotainment systems, testing up to 25 kV (air discharge) is common. The LISUN ESD61000-2C covers this entire range.<\/p>\n

        Q3: Can the LISUN ESD61000-2C be used to test the ESD sensitivity of a single <\/strong>Electronic Component (e.g., an IC)?<\/strong>
        \nYes. While the standard ESD Gun is designed for system-level testing, the optional ESD-CDM<\/strong> attachment adapts the generator to perform component-level Charged Device Model<\/strong> (CDM) testing. For JEDEC-compliant Human Body Model (HBM) testing of components, however, a dedicated component-level tester (like the LISUN ESD-883D) is generally preferred due to lower parasitic capacitance in the test fixture.<\/p>\n

        Q4: What is the significance of the pulse rise time being below 1.0 ns?<\/strong>
        \nA rise time of under 1.0 ns is specified by IEC 61000-4-2 to accurately represent the fastest mechanical ESD events. A slower rise time would fail to stress the fast transient immunity of input buffers on microcontrollers and FPGAs used in Intelligent Equipment<\/strong> \u305d\u3057\u3066 Communication Transmission<\/strong> systems. A generator with a slower rise time may pass a DUT that would fail in a real-world scenario.<\/p>\n

        Q5: Are there any special environmental conditions required for ESD testing with this generator?<\/strong>
        \nYes. According to IEC 61000-4-2, the standard test environment should be 15\u00b0C to 35\u00b0C with a relative humidity of 30% to 60%. For Spacecraft<\/strong> or dry climate applications, testing at lower humidity (e.g., 10% to 20%) is recommended to simulate worst-case discharge conditions. The LISUN ESD61000-2C maintains its output voltage accuracy across this humidity range, provided the ambient temperature is within the 0\u00b0C to 40\u00b0C specification.<\/p>","protected":false},"excerpt":{"rendered":"

        Whitepaper: Technical Analysis of the LISUN ESD61000-2 Series Electrostatic Discharge Generator and Associated Benefits for Compliance Testing Abstract Electrostatic discharge (ESD) represents a significant threat to the reliability and operational integrity of modern electronic systems. The LISUN ESD61000-2 series, particularly the ESD61000-2C model, is a precision instrument designed to simulate ESD events in accordance with international standards. This document provides a comprehensive technical examination of the generator\u2019s features, its application across diverse industrial sectors\u2014including lighting fixtures, medical devices, and rail transit\u2014and the quantifiable benefits derived from its use in product development and compliance verification. 1. Introduction: The Role of Precision ESD Simulation in Product Reliability The miniaturization of semiconductor geometries […]<\/p>\n","protected":false},"author":1,"featured_media":3228,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[828],"class_list":["post-8881","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs","tag-electricity-generator"],"_links":{"self":[{"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/posts\/8881","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/comments?post=8881"}],"version-history":[{"count":1,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/posts\/8881\/revisions"}],"predecessor-version":[{"id":8882,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/posts\/8881\/revisions\/8882"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/media\/3228"}],"wp:attachment":[{"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/media?parent=8881"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/categories?post=8881"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ledtestsystem.com\/ja\/wp-json\/wp\/v2\/tags?post=8881"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}