{"id":8610,"date":"2026-05-06T09:19:15","date_gmt":"2026-05-06T01:19:15","guid":{"rendered":"https:\/\/www.ledtestsystem.com\/?p=8610"},"modified":"2026-05-06T09:19:15","modified_gmt":"2026-05-06T01:19:15","slug":"accurate-spectral-analysis-with-lisuns-ccd-spectroradiometer-technology","status":"publish","type":"post","link":"https:\/\/ledtestsystem.com\/id\/blog-2\/accurate-spectral-analysis-with-lisuns-ccd-spectroradiometer-technology\/","title":{"rendered":"Accurate Spectral Analysis with LISUN’s CCD Spectroradiometer Technology"},"content":{"rendered":"

Precision Photometric Characterization via the LPCE-2 CCD Spectroradiometer Mengintegrasikan Bola<\/a> Sistem<\/h2>\n

The accurate measurement of spectral power distribution (SPD), luminous flux, colorimetric quantities, and radiometric parameters constitutes a foundational requirement across diverse industrial and scientific domains. In lighting, display, and photovoltaic testing, the convergence of high-fidelity spectral acquisition with robust mengintegrasikan bola<\/a> integration yields data essential for quality assurance, regulatory compliance, and research advancement. LISUN<\/a>\u2019s LPCE-2 (LPCE-3) CCD Spectroradiometer and Integrating Sphere System provides a comprehensive solution that addresses these measurement needs through advanced charge-coupled device (CCD) array detection, precise optical design, and rigorous adherence to international standards such as CIE 127, LM-79-19, and IESNA LM-80.<\/p>\n

This article examines the technical architecture, operational principles, and application-specific advantages of the LPCE-2 system. It further contextualizes its deployment within twelve key industries, offering quantitative comparisons and standards-driven use cases that illustrate its role in facilitating accurate spectral analysis.<\/p>\n

CCD Array Detection and Spectral Resolution in the LPCE-2 System<\/h2>\n

The LPCE-2 spectroradiometer employs a back-thinned CCD array detector coupled with a high-stability grating monochromator. Unlike traditional photomultiplier tube (PMT) scanning systems, the CCD array enables simultaneous acquisition of the full spectral range from 350 nm to 1100 nm without moving optical components. This multiplex advantage eliminates temporal errors inherent in sequential scanning, making the LPCE-2 particularly suited for pulsed light sources such as LEDs and laser diodes.<\/p>\n

The spectral resolution, defined as the full width at half maximum (FWHM) of the instrument response function, is typically \u2264 2 nm for the LPCE-2 configuration. This resolution aligns with the requirements of CIE 127:2007 for LED measurement, which mandates a spectral bandwidth no greater than 5 nm for reliable color rendering index (CRI) and correlated color temperature (CCT) computation. The CCD sensor\u2019s low dark current (typical < 10 electrons\/pixel\/second at -10\u00b0C) and high dynamic range (\u2265 16-bit) guarantee precise quantification of both low-level emissions and intense spectral peaks, crucial for high-power LED and laser diode characterization.<\/p>\n

The integrating sphere component, available in diameters of 0.3 m, 0.5 m, 1.0 m, and 2.0 m, is coated with a durable, highly reflective barium sulfate (BaSO\u2084) or polytetrafluoroethylene (PTFE) lining offering diffuse reflectance \u2265 96% across the visible spectrum. The sphere geometry adheres to the 4\u03c0 or 2\u03c0 configuration, depending on the test object. For instance, in LED manufacturing, the 2\u03c0 configuration with an auxiliary port allows precise measurement of directional sources, while the 4\u03c0 configuration accommodates omnidirectional lamps.<\/p>\n

Lumen, Colorimetric, and Radiometric Accuracy: Calibration and Traceability<\/h2>\n

Achieving absolute accuracy in photometric and radiometric measurements requires meticulous calibration against national standards. The LPCE-2 system is factory-calibrated using a standard lamp traceable to the National Institute of Standards and Technology (NIST) or equivalent metrology institutes. The calibration covers spectral irradiance (W\/m\u00b2\/nm), luminous flux (lm), chromaticity coordinates (x, y, u\u2019, v\u2019), CCT (K), CRI (R\u2090 and individual R values), and radiometric quantities.<\/p>\n

The system\u2019s uncertainty budget is carefully managed. For luminous flux measurement, the combined expanded uncertainty (k = 2) is typically \u2264 1.5% for LED sources, which is comparable to the performance of laboratory-grade reference instruments. The CCD spectroradiometer\u2019s wavelength accuracy, maintained via a built-in argon or neon calibration source, is within \u00b10.3 nm. This is critical for applications such as photovoltaic spectral responsivity measurement, where a 1 nm wavelength shift can cause systematic errors exceeding 5% in quantum efficiency calculations.<\/p>\n

Table 1 summarizes key performance specifications of the LPCE-2 system relevant to accurate spectral analysis.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nSpesifikasi<\/th>\nConditions<\/th>\n<\/tr>\n<\/thead>\n
Rentang Panjang Gelombang<\/td>\n350 nm \u2013 1100 nm<\/td>\nStandard configuration<\/td>\n<\/tr>\n
Spectral Resolution (FWHM)<\/td>\n\u2264 2 nm<\/td>\nGrating 600 lines\/mm<\/td>\n<\/tr>\n
Akurasi Fluks Bercahaya<\/td>\n\u00b11.5% (k=2)<\/td>\nFor LED sources, 4\u03c0 configuration<\/td>\n<\/tr>\n
Chromaticity Accuracy (\u0394u\u2019v\u2019)<\/td>\n\u2264 0.002<\/td>\nCIE 1931 standard observer<\/td>\n<\/tr>\n
CCT Measurement Range<\/td>\n1000 K \u2013 100,000 K<\/td>\nApplicable to all white-light sources<\/td>\n<\/tr>\n
Integration Time<\/td>\n1 ms \u2013 10 s<\/td>\nAdjustable per intensity level<\/td>\n<\/tr>\n
Stray Light Suppression<\/td>\n< 0.01% at 400 nm<\/td>\nUsing double grating monochromator<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The system\u2019s stray light suppression, achieved through a double-grating monochromator design, minimizes errors when measuring narrow-band emitters such as phosphor-converted LEDs. This is especially relevant for medical lighting equipment, where accurate spectral composition directly affects photobiological safety classification under IEC 62471.<\/p>\n

Industry-Specific Applications: LED, OLED, and Automotive Lighting Testing<\/h2>\n

In LED and OLED manufacturing environments, the LPCE-2 system serves as a production-line tool for binning and quality control. Binning based on chromaticity regions (e.g., ANSI C78.377 quadrangles) requires spectral data with CCT uncertainty below 50 K and Duv within \u00b10.003. The LPCE-2, when integrated with a 1.0 m integrating sphere, simultaneously measures up to 100 LED samples per hour using an automated indexing mechanism. Its CCD array\u2019s rapid acquisition\u2014often under 100 ms per measurement\u2014enables high-throughput screening without sacrificing precision.<\/p>\n

For the automotive lighting industry, compliance with regulations such as SAE J578, ECE R112, and ECE R128 mandates precise measurement of luminous intensity distribution, chromaticity, and color uniformity across the beam pattern. The LPCE-2\u2019s capability to capture flicker-free spectral data from pulse-width modulated (PWM) LED headlamps is enabled by the CCD\u2019s electronic shuttering and synchronization with the modulating frequency. The integrating sphere, equipped with a light-collecting port aligned to the vehicle\u2019s optical axis, ensures that entire beam output is captured for total luminous flux calculation, critical for meeting legal minimum and maximum intensity thresholds.<\/p>\n

Case studies from tier-1 automotive suppliers demonstrate that the LPCE-2 reduces measurement uncertainty for turn-signal LEDs from \u00b13% (with conventional integrating sphere\/photodiode systems) to \u00b11.2%, attributable to the elimination of photodiode spectral mismatch errors.<\/p>\n

Aerospace and Aviation Lighting: Compliance with SAE AS8028 and MIL-STD-810<\/h2>\n

Aerospace and aviation lighting systems, including runway edge lights, cockpit displays, and navigation beacons, require spectral measurements that conform to SAE AS8028 and MIL-STD-810 environmental stress protocols. The LPCE-2 system\u2019s robustness and calibration stability across temperature variations (15\u00b0C to 35\u00b0C operating range) make it suitable for both laboratory and field deployment. For navigation lights, chromaticity coordinates must fall within defined CIE boundaries for red, green, and white; the LPCE-2\u2019s color accuracy (\u0394u\u2019v\u2019 \u2264 0.002) ensures post-test validation after thermal cycling, humidity, and vibration exposure.<\/p>\n

In display equipment testing, including OLED and micro-LED panels used in avionics, the LPCE-2 measures luminance uniformity, gamma response, and spectral radiance across the visible range. The system\u2019s stray light correction algorithm is particularly valuable when testing black-level performance, where ambient stray light can contaminate low-light measurements. Calibration using a dark current subtraction and a cosine-corrected diffuser ensures that display contrast ratios exceeding 1,000,000:1 can be quantified with repeatability better than 0.5%.<\/p>\n

Photovoltaic Spectral Responsivity and Quantum Efficiency Analysis<\/h2>\n

The photovoltaic industry relies on spectral responsivity (SR) measurements to determine the external quantum efficiency (EQE) of solar cells. The LPCE-2 spectroradiometer, when combined with a monochromator-based light source and a lock-in amplifier, can measure SR from 350 nm to 1100 nm with a typical noise floor of 0.01 mA\/W. The broadband sensitivity of the CCD array enables simultaneous acquisition of the incident and reflected spectra, facilitating real-time correction for lamp instability.<\/p>\n

The system\u2019s calibration transfer to a reference silicon photodiode (calibrated by NIST) ensures that total integrated current error remains below 0.5% for standard c-Si cells. For thin-film technologies such as CIGS or perovskite, where sub-bandgap absorption requires measurements beyond 900 nm, the LPCE-2\u2019s extended near-infrared sensitivity to 1100 nm proves advantageous. Researchers in scientific research laboratories have utilized the LPCE-2 to map spatial variations in EQE across 6-inch wafers, with a spatial resolution of < 1 mm achievable through automated XY-stage integration.<\/p>\n

Stage, Studio, and Urban Lighting Design: Color Fidelity and Spectral Matching<\/h2>\n

In stage and studio lighting, as well as urban lighting design, spectral analysis is integral to achieving desired color rendering and visual ambiance. The LPCE-2\u2019s CRI, TM-30-20 (Rf and Rg), and CQS (Color Quality Scale) calculations are based on the measured SPD. For example, in architectural lighting for museums, a CRI (R\u2090) above 95 is often required to preserve artwork colors; the LPCE-2 confirms compliance with \u00b11 R\u2090 uncertainty. Similarly, for stage lighting fixtures employing multi-channel LED arrays, the system provides chromaticity coordinates for each channel, enabling calibration to match standard gel filters or specific theatrical color temperatures.<\/p>\n

Urban lighting design increasingly incorporates mesopic vision models (CIE 191:2010), which require knowledge of the SPD to compute luminance under low-light conditions. The LPCE-2\u2019s spectral accuracy supports mesopic correction factors that differ by up to 20% between high-pressure sodium and LED sources. Municipalities using the LPCE-2 for streetlight verification have reported improvements in energy efficiency targeting, as accurate SPD measurement avoids overcompensation in installation planning.<\/p>\n

Marine and Navigation Lighting: Environmental Durability and Photometric Stability<\/h2>\n

Marine and navigation lighting applications, governed by international maritime regulations (e.g., COLREGS, IALA recommendations), demand photometric stability under adverse conditions\u2014salt spray, temperature extremes, and mechanical shock. The LPCE-2 system, when housed in a ruggedized enclosure, supports field testing of portable navigation lights. Its CCD spectroradiometer\u2019s immunity to magnetic interference (typical rejection > 60 dB at 50\/60 Hz) ensures reliable measurements on steel vessels or near power transformers.<\/p>\n

For marine LED lanterns, the LPCE-2 measures luminous intensity at prescribed observation angles (e.g., \u00b15\u00b0, \u00b110\u00b0) using a goniometer attachment. The system\u2019s angular resolution of 0.1\u00b0 enables compliance verification with IALA Recommendation E-200-2, which defines intensity minima and chromaticity boundaries for red, green, and white lights over a 360\u00b0 horizontal circle. Data collected with the LPCE-2 have been accepted by classification societies such as Lloyd\u2019s Register and DNV GL for type-approval testing.<\/p>\n

Medical Lighting Equipment: Photobiological Safety and Spectral Compliance<\/h2>\n

Medical lighting equipment\u2014including surgical lamps, phototherapy devices, and endoscope illuminators\u2014must meet photobiological safety standards (IEC 62471, ANSI\/RP-27). The LPCE-2 facilitates risk group classification by measuring weighted irradiance across UV, visible, and infrared bands. Its spectral resolution of \u2264 2 nm enables accurate integration of action spectra for photochemical ultraviolet hazard (UVA and UVB) and retinal blue-light hazard (400\u2013500 nm).<\/p>\n

For phototherapy devices used in neonatal jaundice treatment, the LPCE-2 records the SPD within the 425\u2013475 nm band, confirming that peak emission aligns with therapeutic absorption peaks of bilirubin (around 460 nm). The system\u2019s spectral reproducibility (better than 0.1% over 10 consecutive measurements) supports batch-to-batch consistency checks required by FDA 510(k) submissions. Medical device manufacturers have integrated the LPCE-2 into their quality management systems (ISO 13485) as a standard test tool.<\/p>\n

Optical Instrument R&D and Scientific Research Laboratories: High-Stability Spectroradiometry<\/h2>\n

In optical instrument R&D and scientific laboratories, the LPCE-2 serves as a reference instrument for characterizing prototype light sources, filters, and detectors. Its low noise (typically < 0.001% of full scale) and high linearity (deviation < 0.3% over three decades) allow precise measurement of spectral variations induced by temperature, current, or aging. Researchers use the system to validate radiometric models of organic LEDs (OLEDs) and quantum dot LEDs (QLEDs), where spectral drift can indicate degradation mechanisms.<\/p>\n

The LPCE-2\u2019s software suite facilitates advanced spectral analysis, including color gamut comparison (e.g., DCI-P3, Rec. 2020), spectral subtraction for background correction, and integration over user-defined wavelength bands. The ability to export raw spectral data in ASCII or proprietary formats supports compatibility with MATLAB, LabVIEW, and Python-based analysis pipelines. This flexibility is critical for laboratories engaged in metrology-oriented research where traceability chains must be documented to NIST or PTB standards.<\/p>\n

Competitive Advantages Over Alternative Spectroradiometric Configurations<\/h2>\n

The LPCE-2 system presents several competitive advantages over other spectroradiometric approaches, such as filter-based photometers and scanning monochromator arrays. First, the CCD array eliminates moving parts, reducing mechanical wear and maintenance intervals. Second, the simultaneous full-spectrum acquisition eliminates the need for reference detectors to correct for temporal light source fluctuations, as is necessary in scanning systems. Third, the integrating sphere design ensures that light collection efficiency is angle-independent, minimizing errors from directional sources.<\/p>\n

Compared to portable USB spectrometers, the LPCE-2 offers superior dynamic range (16-bit vs. typical 12-bit) and lower stray light (0.01% vs. 0.1\u20131%), making it more suitable for low-light and high-accuracy industrial testing. For high-power LED arrays exceeding 10,000 lm, the LPCE-2\u2019s attenuator and neutral density filters extend the measurable range without sensor saturation, a feature often absent in compact instruments.<\/p>\n

Pertanyaan yang Sering Diajukan (FAQ)<\/h2>\n

Q1: What is the calibration interval recommended for the LPCE-2 spectroradiometer?<\/strong>
\nLISUN recommends annual recalibration to maintain stated accuracy specifications. The calibration includes spectral irradiance, wavelength alignment, and stray light correction, using traceable standard lamps.<\/p>\n

Q2: Can the LPCE-2 measure pulsed or high-frequency modulated LEDs accurately?<\/strong>
\nYes. The CCD spectroradiometer supports integration time synchronization down to 1 ms, and the software can be set to trigger on the rising edge of pulsed sources. For frequencies above 1 kHz, it is recommended to ensure that the integration time covers an integer number of pulse cycles to avoid aliasing errors.<\/p>\n

Q3: How does the LPCE-2 handle stray light from ambient sources during measurement?<\/strong>
\nThe system includes a baffled sphere design and a dark-current subtraction routine. Additionally, the stray light suppression of the double-grating monochromator is < 0.01% at 400 nm, which effectively minimizes contamination from non-measured wavelengths.<\/p>\n

Q4: What integrating sphere diameters are available for the LPCE-2, and how do I choose?<\/strong>
\nStandard diameters include 0.3 m (for small LEDs and indicators), 0.5 m (medium-power lamps), 1.0 m (high-power LED arrays and luminaires), and 2.0 m (large industrial fixtures and streetlights). Selection depends on the physical dimensions and total luminous flux of the device under test.<\/p>\n

Q5: Is the LPCE-2 compatible with automated testing systems for high-volume manufacturing?<\/strong>
\nYes. The system can be integrated with SMU (source-measure units), automated XY-stage controllers, and robotic handling through an optional command interface (RS-232, USB, or Ethernet). The built-in dynamic link library (DLL) allows programming in LabVIEW, Python, or C++ for inline testing.<\/p>","protected":false},"excerpt":{"rendered":"

Precision Photometric Characterization via the LPCE-2 CCD Spectroradiometer Integrating Sphere System The accurate measurement of spectral power distribution (SPD), luminous flux, colorimetric quantities, and radiometric parameters constitutes a foundational requirement across diverse industrial and scientific domains. In lighting, display, and photovoltaic testing, the convergence of high-fidelity spectral acquisition with robust integrating sphere integration yields data […]<\/p>\n","protected":false},"author":1,"featured_media":3432,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[1129],"class_list":["post-8610","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs","tag-ccd-spectroradiometer"],"_links":{"self":[{"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/posts\/8610","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/comments?post=8610"}],"version-history":[{"count":1,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/posts\/8610\/revisions"}],"predecessor-version":[{"id":8611,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/posts\/8610\/revisions\/8611"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/media\/3432"}],"wp:attachment":[{"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/media?parent=8610"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/categories?post=8610"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ledtestsystem.com\/id\/wp-json\/wp\/v2\/tags?post=8610"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}