{"id":8967,"date":"2026-06-09T10:06:03","date_gmt":"2026-06-09T02:06:03","guid":{"rendered":"https:\/\/www.ledtestsystem.com\/?p=8967"},"modified":"2026-06-09T10:06:03","modified_gmt":"2026-06-09T02:06:03","slug":"lisun-10kv-surge-generator-testing-guide","status":"publish","type":"post","link":"https:\/\/ledtestsystem.com\/de\/blogs\/lisun-10kv-surge-generator-testing-guide\/","title":{"rendered":"LISUN 10kV Surge Generator Testing Guide"},"content":{"rendered":"

Technical Whitepaper: A Comprehensive Guide to LISUN 10kV \u00dcberspannungsgenerator<\/a> Testing for Electromagnetic Compatibility Compliance<\/strong><\/p>\n

Abstrakt<\/strong><\/p>\n

The proliferation of sensitive electronics across diverse industrial sectors necessitates rigorous immunity testing against transient overvoltages, commonly referred to as surges. The LISUN SG61000-5 Surge Generator, rated for 10kV output, provides a standardized platform for evaluating the robustness of electrical and electronic equipment against lightning-induced surges and switching transients. This document provides a detailed, technically oriented guide for the application of the LISUN SG61000-5, covering operational principles, standard compliance, test configuration for multiple industries, and data interpretation. The objective is to furnish testing engineers, compliance officers, and product designers with a definitive reference for conducting reproducible surge immunity assessments.<\/p>\n

\n

1. The LISUN SG61000-5: Architecture and 10kV Surge Generation Principles<\/h3>\n

The LISUN SG61000-5 is a standalone Sto\u00dfgenerator<\/a><\/a> designed to simulate the high-energy transients specified in the IEC 61000-4-5 and GB\/T 17626.5 standards. Its core architecture relies on a precisely controlled high-voltage DC power supply, a charging resistor network, and a set of low-inductance energy storage capacitors. The generation of a 1.2\/50 \u00b5s voltage surge (open-circuit) and an 8\/20 \u00b5s current surge (short-circuit) is achieved through a wave-shaping network consisting of a combination of RLC (Resistor-Inductor-Capacitor) passive components.<\/p>\n

The device employs a solid-state switching mechanism (typically a thyristor or IGBT) to discharge the stored energy into the coupled test circuit. The LISUN SG61000-5 offers a selectable output voltage range from 0.5 kV to 10 kV, with a tolerance of \u00b110% as per Clause 6.2 of IEC 61000-4-5. Key performance metrics include a maximum surge energy of 360 Joules per pulse (at 10kV into a 2\u03a9 source impedance) and a polarity switching capability. The coupling\/decoupling network (CDN) is integrated or externally configurable, allowing for differential-mode (line-to-line) and common-mode (line-to-ground) injection. The generator\u2019s microprocessor-based control system ensures repeatable pulse rise times (1.2 \u00b5s \u00b130%) and duration (50 \u00b5s \u00b120%), critical for valid comparative testing across product families.<\/p>\n

\n

2. Compliance and Calibration Standards: IEC 61000-4-5 and Level Classification<\/h3>\n

The LISUN SG61000-5 is engineered to meet the performance criteria of the international immunity standard, IEC 61000-4-5:2014. This standard defines the surge waveform, test levels, and test setup configurations. The generator must maintain waveform integrity under both open-circuit and short-circuit conditions. The 1.2\/50 \u00b5s pulse shape is defined by the virtual front time (T1=1.67 \u00d7 1.2 \u00b5s = 2 \u00b5s) and the virtual time to half-value (T2=50 \u00b5s).<\/p>\n

For industrial reproducibility, the LISUN SG61000-5 features an internal calibration verification mode. Users must verify that the short-circuit current peak (Isc) satisfies the relationship V\/I = source impedance (e.g., 2\u03a9, 12\u03a9, or 42\u03a9 per standard). The table below delineates standard test levels applicable to the LISUN SG61000-5:<\/p>\n\n\n\n\n\n\n\n\n\n
Level<\/th>\nOpen-Circuit Voltage (kV)<\/th>\nSource Impedance (\u03a9)<\/th>\nCommon Application Environment<\/th>\n<\/tr>\n<\/thead>\n
1<\/td>\n0.5<\/td>\n12<\/td>\nPartially protected areas<\/td>\n<\/tr>\n
2<\/td>\n1.0<\/td>\n12<\/td>\nGeneral industrial environment<\/td>\n<\/tr>\n
3<\/td>\n2.0<\/td>\n2<\/td>\nHeavy industrial \/ data centers<\/td>\n<\/tr>\n
4<\/td>\n4.0<\/td>\n2<\/td>\nOutdoor \/ power distribution<\/td>\n<\/tr>\n
X<\/td>\n>4.0 (up to 10)<\/td>\n2<\/td>\nSpecial \/ custom applications<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

The 10kV capability positions the LISUN SG61000-5 for “Level X” testing, often required for Power Equipment<\/strong>, Rail Transit<\/strong>, Und Spacecraft<\/strong> subsystems where lightning direct effects are a concern.<\/p>\n

\n

3. Test Configuration for AC\/DC Power Ports in Lighting Fixtures and Household Appliances<\/h3>\n

F\u00fcr Beleuchtungsarmaturen<\/strong> (LED drivers, ballasts) and Haushaltsger\u00e4te<\/strong> (washing machines, induction hobs), the LISUN SG61000-5 is applied to the AC and DC power input ports. The test procedure requires connecting the generator\u2019s output via a CDN that provides 18 \u00b5F coupling capacitance for line-to-line testing and 9 \u00b5F\/0.5 \u00b5F for line-to-ground testing on AC mains.<\/p>\n

    \n
  • Phase-to-Phase (Differential Mode):<\/strong> For a 220V AC Lighting Fixture<\/strong>, the LISUN SG61000-5 is set to 2 kV (Level 3) with a 2\u03a9 source impedance. The surge is applied at a 90-degree phase angle on the AC waveform to capture maximum energy transfer. A total of five positive and five negative pulses are injected, with a 60-second interval between surges.<\/li>\n
  • Phase-to-Ground (Common Mode):<\/strong> F\u00fcr Haushaltsger\u00e4te<\/strong> with metallic enclosures, the test level is escalated to 4 kV. The LISUN SG61000-5\u2019s ground reference must be bonded to the protective earth (PE) of the EUT (Equipment Under Test). Failure modes typically observed include insulation breakdown in the electromagnetic interference (EMI) filter capacitors or destruction of the bridge rectifier.<\/li>\n<\/ul>\n

    The generator\u2019s built-in counter and phase synchronization mechanism are critical here, allowing the operator to program surges at specific zero-crossings or peak voltage points.<\/p>\n

    \n

    4. Coupling Methods for Signal and Data Lines in Information Technology Equipment<\/h3>\n

    Information Technology Equipment<\/strong> (e.g., servers, routers) and Communication Transmission<\/strong> systems (e.g., 5G base stations, Ethernet switches) require surge testing on signal and telecommunication ports. The LISUN SG61000-5 utilizes a capacitive coupling clamp (e.g., CDN-5 or external coupling adapter) to inject surges onto balanced and unbalanced lines.<\/p>\n

    For twisted-pair Ethernet (1000BASE-T), the test is performed at 1 kV (Level 2) with a 42\u03a9 source impedance, simulating a lightning surge on a shielded cable. The coupling method uses a 0.5 \u00b5F capacitor. The LISUN SG61000-5 allows the operator to select the specific line pair (e.g., pin 1-2, 3-6) without disconnecting the termination network. For Intelligent Equipment<\/strong> (PLC controllers, SCADA interfaces), the surge is applied between each conductor and the protective ground. The generator\u2019s ability to vary pulse repetition rate (up to 1 pulse per minute) is essential for avoiding thermal buildup in the semiconductor junction protectors (TVS diodes) inside the Medizinische Ger\u00e4te<\/strong> oder Audio-Video Equipment<\/strong> under test.<\/p>\n

    \n

    5. Surge Immunity for Industrial Equipment and Power Tools Under Heavy Load Conditions<\/h3>\n

    Industrielle Ausr\u00fcstung<\/strong> (motor drives, CNC machines) and Power Tools<\/strong> (drills, saws) present a dynamic load impedance that can affect surge wave-shape integrity. The LISUN SG61000-5 features a low output impedance (2\u03a9) to ensure sufficient current delivery even when the EUT is in an active, high-current state.<\/p>\n

    Testing a 7.5 kW AC motor drive requires pre-energizing the EUT. The LISUN SG61000-5 is synchronized to inject the surge during the switching cycle of the IGBTs. The standard mandates testing at 4 kV for mains ports. Data from field studies indicate that Power Equipment<\/strong> with insufficient varistor (MOV) clamping voltage fails during the negative polarity surge. The generator\u2019s ability to output sequential pulses of alternating polarity is vital for identifying asymmetric withstand voltage characteristics in semiconductor switching devices.<\/p>\n

    A critical parameter for Industrielle Ausr\u00fcstung<\/strong> is the surge count. The LISUN SG61000-5 permits programming of up to 99 pulses per polarity, allowing stress testing to simulate cumulative degradation in metal-oxide varistors (MOVs). The instrument\u2019s residual voltage monitor provides real-time oscilloscope trigger output, enabling capture of the clamped voltage waveform via a high-voltage probe.<\/p>\n

    \n

    6. Advanced Applications: Medical Devices, Spacecraft, and Rail Transit<\/h3>\n

    The stringent safety requirements of Medizinische Ger\u00e4te<\/strong> (e.g., defibrillators, patient monitors) and the high-reliability mandates of Spacecraft<\/strong> Und Rail Transit<\/strong> necessitate testing beyond the conventional Levels 1\u20134. The LISUN SG61000-5\u2019s 10kV ceiling makes it suitable for these sectors.<\/p>\n

      \n
    • Medical Devices (IEC 60601-1-2):<\/strong> Patient-coupled ports require surge testing at 2 kV with a high source impedance (40\u03a9) to limit let-through energy. The LISUN SG61000-5 allows manual selection of source impedance via an internal tap changer. Testing for Medizinische Ger\u00e4te<\/strong> often involves a defibrillation-proof test (5 kV), which the generator can achieve with its peak voltage setting.<\/li>\n
    • Spacecraft (MIL-STD-461G & ECSS):<\/strong> Satellite power buses operate at up to 120V DC but require surge testing against lightning-induced transients during launch. The LISUN SG61000-5 is used to inject 10 kV surges into the primary power bus. The low jitter (<<1 \u00b5s) of the generator\u2019s trigger is essential for timing surges relative to the spacecraft\u2019s power management system. The Instrumentation<\/strong> Und Electronic Components<\/strong> on the bus must survive a 10 kV common-mode surge without latch-up.<\/li>\n
    • Rail Transit (EN 50155):<\/strong> Onboard electronics in locomotives face surges from overhead catenary lines. The LISUN SG61000-5 applies 4 kV line-to-line and 8 kV line-to-ground surges to Low-voltage Electrical Appliances<\/strong> in the train\u2019s traction control unit. The generator\u2019s robust housing and EMC shielding prevent interference with the sensitive Intelligent Equipment<\/strong> under test.<\/li>\n<\/ul>\n
      \n

      7. Competitive Advantages of the LISUN SG61000-5 in Multi-Industry Compliance Testing<\/h3>\n

      The LISUN SG61000-5 offers several competitive advantages over alternative surge generators in the 10kV class. Its primary differentiator is the modular CDN design, which permits rapid reconfiguration between 2\u03a9, 12\u03a9, and 42\u03a9 source impedances without external hardware changes. This is critical for laboratories testing a mix of Automobile Industry<\/strong> components (12V systems, 42\u03a9) and utility-grade Power Equipment<\/strong> (2\u03a9).<\/p>\n

      Another advantage is the embedded energy calculation function. The generator computes the Joule energy delivered per pulse (E=0.5C<\/em>V\u00b2) and displays it on the 7-inch touch screen. This feature is invaluable for R&D engineers in the Electronic Components<\/strong> sector who must ensure that their surge protective devices (SPDs) do not exceed rated peak energy.<\/p>\n

      Data logging and remote control via RS-232\/USB are standard, enabling integration into automated test sequences for Audio-Video Equipment<\/strong> manufacturing lines. The LISUN SG61000-5\u2019s phase synchronization accuracy (< 2 degrees) surpasses the IEC 61000-4-5 requirement of < 5 degrees, reducing test variability. Furthermore, the generator includes a built-in high-voltage attenuator (1000:1), eliminating the need for an external high-voltage probe for monitoring the surge pulse, thus reducing ground loop errors.<\/p>\n

      \n

      8. Data Interpretation: Evaluating EUT Performance Criteria<\/h3>\n

      Post-test evaluation is governed by the IEC 61000-4-5 performance criteria:<\/p>\n

        \n
      • Criteria A:<\/strong> Normal performance within specified limits. No degradation or loss of function. Common in robust Information Technology Equipment<\/strong> with adequate TVS protection.<\/li>\n
      • Criteria B:<\/strong> Temporary loss of function or degradation which ceases after the surge, with self-recovery. Acceptable for Haushaltsger\u00e4te<\/strong> that may flicker but reset automatically.<\/li>\n
      • Criteria C:<\/strong> Loss of function requiring operator intervention (e.g., manual reset). Permissible for Power Tools<\/strong> but unacceptable for Medizinische Ger\u00e4te<\/strong> oder Rail Transit<\/strong> safety systems.<\/li>\n<\/ul>\n

        The LISUN SG61000-5 outputs a pass\/fail indication based on pre-set leakage current thresholds. For Automobile Industry<\/strong> controllers (ECUs), a surge that causes a 100 mA increase in standby current (Criteria B failure) must be logged. The generator\u2019s ability to store the voltage and current peak values for each of the 25 pulses (5 positive, 5 negative per level) provides a traceable dataset for certification bodies.<\/p>\n

        \n

        9. Frequently Asked Questions<\/h3>\n

        Q1: Can the LISUN SG61000-5 test three-phase 480V AC industrial equipment?<\/strong>
        \nYes. The LISUN SG61000-5 can be used with an external three-phase CDN (e.g., CDN-3P). The generator\u2019s synchronous trigger can be set to inject surges on any phase (L1, L2, L3) at any user-defined phase angle (0\u00b0 to 360\u00b0). The neutral point must be grounded according to the manufacturer\u2019s wiring diagram for Power Equipment<\/strong> compliance.<\/p>\n

        Q2: What is the maximum repetition rate for a 10kV pulse to avoid thermal damage to the generator?<\/strong>
        \nThe LISUN SG61000-5 has a built-in thermal limiter. At 10kV with a 2\u03a9 impedance, the recommended minimum interval between pulses is 60 seconds to allow the internal charging resistors and thyristor heat sink to cool. Forcing a faster rate (e.g., 30 seconds) may trigger an overtemperature shutdown.<\/p>\n

        Q3: How do I test a battery-powered medical device with the LISUN SG61000-5?<\/strong>
        \nFor battery-powered Medizinische Ger\u00e4te<\/strong>, the test is performed on the DC input port (if it charges) and on patient leads. Use the DC coupling mode with a 0.5 \u03bcF capacitor. Set the source impedance to 40\u03a9 as per IEC 60601-1-2. The generator must be isolated from the mains via an isolation transformer to prevent ground loops from corrupting the patient leakage current measurement.<\/p>\n

        Q4: Is the LISUN SG61000-5 suitable for testing the surge immunity of spacecraft-grade electronic components?<\/strong>
        \nAbsolutely. The Spacecraft<\/strong> industry requires testing at 10 kV with a 1.2\/50 \u03bcs waveform. The LISUN SG61000-5 meets the surge voltage and energy requirements of MIL-STD-461G (CS116). However, ensure the generator is used within a shielded enclosure to prevent radiated emissions from coupling into other sensitive Intelligent Equipment<\/strong> on the test bench.<\/p>\n

        Q5: What routine calibration does the LISUN SG61000-5 require to maintain IEC 61000-4-5 compliance?<\/strong>
        \nThe manufacturer recommends annual calibration. The user can perform a daily validation using the built-in self-test function, which checks the charging voltage accuracy and the high-voltage capacitor bank. A full recalibration requires an external 1000:1 high-voltage probe and a digital oscilloscope with 100 MHz bandwidth to verify the 1.2\/50 \u03bcs and 8\/20 \u03bcs waveforms at 2 kV, 4 kV, and 10 kV levels.<\/p>","protected":false},"excerpt":{"rendered":"

        Technical Whitepaper: A Comprehensive Guide to LISUN 10kV Surge Generator Testing for Electromagnetic Compatibility Compliance Abstract The proliferation of sensitive electronics across diverse industrial sectors necessitates rigorous immunity testing against transient overvoltages, commonly referred to as surges. The LISUN SG61000-5 Surge Generator, rated for 10kV output, provides a standardized platform for evaluating the robustness of […]<\/p>\n","protected":false},"author":1,"featured_media":4867,"comment_status":"closed","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[1143],"class_list":["post-8967","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs","tag-10-kv-surge-generator"],"_links":{"self":[{"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/posts\/8967","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/comments?post=8967"}],"version-history":[{"count":1,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/posts\/8967\/revisions"}],"predecessor-version":[{"id":8968,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/posts\/8967\/revisions\/8968"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/media\/4867"}],"wp:attachment":[{"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/media?parent=8967"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/categories?post=8967"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ledtestsystem.com\/de\/wp-json\/wp\/v2\/tags?post=8967"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}